1996 Buick Roadmaster
[email protected]
Bryan, TX
979-220-6139
MILEAGE
22750
YEAR
1996
ENGINE
8
LOCATION
Elgin, TX
STOCK
--
FULL SPECS
DESCRIPTION
Having difficulty in reducing the size of the photos in order to place here. PLEASE ask for more photos. I have many of inside and out!
It is reported that even though the odometer shows 22,750 miles, there is less than 10,000 miles since the engine and drive train rebuild.
LT1 Rebuilt into a 383
Rebuild Included:
1. AFR Heads
2. Arp Main Bolts
3. Comp Hardware Kit for Lifters
4. Com Roller Lifters
5. ARP Head Bolt Kit
6. DSS Pistons
7. Freeze Plug Kit
8. Cam Bearings
9. Main Caps 4 Bolt
10. LT1 Timing Chain
11. Roller Rocker Arms
12. ARP Rocker Studs
13. Meiling Oil Pump
14. Meiling Pickup
15. ARP Driveshaft Oil Pump
16. Piston rings
17. Main Bearings
18. Rod Bearings
19. Rear Main Seal Kit
20. Oil Pump Stud
21. Harmonic Damper
22. Harmonic Damper Bold
23. Timing Cover Set
24. Cometic Head Gaskets
25. Intake Gaskets
26. Manton Pushrods
27. Scat Crank
28. Scat Rods/5.700
29. M Motion Cam/Custom
30. Flexplate SFI
31. Block Work
32. Install Main caps 4 bolt
33. Line Bore
34. Line Hone Mains
35. Tru Deck
36. R&R Cam Bearings
37. Jet Wash Block
38. R&R Freeze Plugs
39. Blueprint Oil Pump, Weld Pickup to Pump
40. Rotating Work
41. V8 Balance Small Block
42. Lite Hone SE Rod
43. Headwork
44. V8 Street Valve Job
45. Set Up Spring Pressure
46. Seals
47. Valve Spring Shims Kit
Transmission replaced/upgraded – Unk what to but confirmed by Case Rance at SWG Auto
Rear End Gearing changed from Stock to 3.08
Dyno’d by
SWG AutomotivePer discussion w/ Casey Rance he remembers everything about John and the 1996 Buick Roadmaster. He stated that when they dyno’d the vehicle that it made 600HP at the flywheel but it only made about 400HP at the wheels due to a restrictive intake manifold/etc.
I, (John’s Son- in Law) explained to Casey that I had a Dyno report in the file for the 1996 Buick Roadmaster but on the sheet, it lists a 2010 Cam not a 1996 Roadmaster. He explained that this is due to the fact that that Dyno didn’t have an input for a 1996 Buick Roadmaster so they had to find something as similar as possible in size/weight etc. The closest thing they could come up with was a 2010 Camaro so that is why it shows that on the Dyno Sheet.
Dyno Results on 05/10/2023 show
Minimum Maximum Avg
346 Ft lbs Torque 412 Ft lbs Torque 384 Ft lbs Torque
295 Horsepower 394 Horsepower 375 Horsepower
Tires: Stock was 235x75R15 and what is currently on it are 245x55 R18
Engine Installation, Transmission replacement and Rear end would have been done by:
Texas Pride Automotive.
Other fun upgrades to Buick:
Upgraded Exhaust with Electronic Cutout System
4 Wheel Disc Brakes (don’t recall if Brembo or Willwood)
Hood Mounted Tachometer
Tinted windows
Vehicle was repainted
CONTACT SELLER
