|
|
|
|
|
|
| |
|
| Price: |
|
$79,000.00 obo |
| Location: |
|
Cleveland, Ohio US |
| Ad Posted: |
|
October 24, 2009 |
| Ad Expires: |
|
November 23, 2009 |
| |
| |
|
|
|
|
|
|
|
| |
| Vehicle Specifics |
| Year: 1968 |
Make / Model: Ford Mustang |
| Mileage: -- |
Title Status: Clear |
| Engine: 8 cyl. Transmission: Manual |
Exterior Color: Silver |
| Doors: 2 |
Interior Color: Red |
|
|
|
| |
| Vehicle Description |
1968 Mustang Eleanor Tribute
Professionally competed in 2006 at a cost of over $140,000
Best in Show, Class and Mustang at the 2006 London Speedorama
Lots of photos of the full rotisserie restoration, lots of new parts
The engine, 351 Windsor built by Keith Craft Racing was stroked to 408 cubic inches that produces 543 HP with 560 ft lbs of torque. The balance and blueprinted engine spec s are: 10 � to 1 Mahle piston, Scat H-beam polished rods, Eagle steel crank, AFR 205 cylinder heads, Edelbrock air gap intake, Holley 750 carburetor, Msd blaster ignition and coil, Ford racing plug wires, XS high torque starter, Canton pump, Comp Cams hydraulic roller camshaft(242 to 252 degrees), Polished Concept one serpentine pulleys and brackets, Polished alternator, power steering, ac and fan, Ram flywheel, pressure plate and clutch, Griffin aluminum radiator, electric fans, oil cooler, Headers, ford power train application 1 �” 3” collectors are Jet Hot coated, Borla pro xs mufflers, CES in Oregon produced the 3” mandrel bent exhaust with an x pipe, chrome 3 �” exhaust tips. Tremec TKO 600 Transmission, ratios: 1st 2.87, 2nd 1.89, 3rd 1.28, 4th 1.00, 5th 0.64 Aluminum bell housing, 3.60 posi-traction rear end, Steel one piece drive shaft. The front suspension started from Mustang II(1973), tubular upper and lower control; arms from speedway motors, Koni shocks, Atco front sway bar(7/8”), Panhard bar, rear �” adjustable sway bar and the 160lbs rear leaf springs with 1 �” drop are from Maier Racing. Powered Wilwood 13” 6 pistons front and 12” 4 pistons rear disc brakes with emergency and proportioning, are cross drilled and slotted and the power from Hydro Boost. The Goodyear Eagles F1 GS-D3 245/40-17” front and 285/40-17 Rears are on Team 3 Rims w/ GT 40 style knock-off lug nuts covers, 17x8” and 17x9 �”. Maier Racing supply the full body kit that consist of: upper and lower nose section and grills, front brace, fiberglass hood and flared deck lid, lower scoops, tail lights and lens, the side skirts are custom steel fabricated, upper functional scoops from Shelby, Hella Headlights with PIAA H4 star white high/low beams, highbeam driving lights PIAA 510 series super whites and lower(clear) driving lights PIAA 40S. All wiring, harness and fuse blocks are new. The Deluxe Red interior is new from Tony Branda Performance, Shelby console and 2 point rollbar, 4 point harnesses, Cobra steering wheel, Autometer white face speedo, tach, fuel, water temperature, oil pressure and temperature gauges, Steeda Triax shifter, Vintage One air conditioning system, Clarion am/fm cd with hidden amps, JBL front(hidden flush in door panels) and rear speaker. |
|
|
| |
|
|
| |
|
|
| |
| DISCLAIMER: The information in this ad is provided by the seller and not OldRide.com. The prices, terms, and reliability of the item remains subject to the direct negotiation between the buyer and seller. OldRide.com is not responsible for any damages that may occur during a transaction. For more resources about purchasing a vehicle online visit our help section "Buying a Vehicle". |
| |
|
|
